• inner-banner

Massive Selection for Stanley Hydraulic Power Unit - AC 380V 1.5KW Single Acting Hydraulic Power Packs – Oumai

Massive Selection for Stanley Hydraulic Power Unit - AC 380V 1.5KW Single Acting Hydraulic Power Packs – Oumai

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

Our business puts emphasis over the administration, the introduction of talented staff, plus the construction of team building, attempting hard to boost the standard and liability consciousness of personnel customers. Our corporation successfully attained IS9001 Certification and European CE Certification of Hydraulic Power Pack For Sale, Dc Hydraulic Power Unit, Hydraulic Unit, We welcome new and old customers from all walks of life to contact us for future business relationships and mutual success!
Massive Selection for Stanley Hydraulic Power Unit - AC 380V 1.5KW Single Acting Hydraulic Power Packs – Oumai Detail:

Main Specifications

Motor: AC 380V 1.1KW
Solenoid valve: 2/2ways solenoid control valve
Pump displacement: 3.2CC/REV
System flow: 4.5lpm
Tank: 12L steel square tank
Mounting type: Vertical
Hydraulic power unit

Power Voltage AC110, AC220, AC380, DC12V, DC24V or customized
Moter Power 0.75kw, 1.1kw, 1.5kw, 2.2kw, 3.0kw or customized
Pump Displacement 0.45ml/r, 0.75ml/r, 1.0ml/r, 1.6ml/r, 2.0ml/r, 2.5ml/r, 3.3ml/r, 4.2ml/r,5.8 ml/r or customized
Solenoid Valve Voltage DC12V, DC24V, AC24V, AC110V, AC220V, manual valve
Mounting Way Horizontal, Vertical
Mounting position Valve block,  bracket, oil tank, electric motor
System Pressure 10mpa, 16mpa, 20mpa, 25mpa
Capacity of tank 1.7L, 2.8L, 3.6L, 5.0L, 6.0L, 8.0L, 10.0L, 12.0L or customized
Circuit 01-20
Port 3/8″ (BSPP/NPT) or customized
Working Continute working, short time working
Frequency 50HZ, 60HZ

Precautions for Use

1. Please read the operation manual carefully and check the product model and parameters for correctness.
2. The hydraulic power unit should be installed correctly and connected correctly. Pay attention to whether the voltage of motor and solenoid valve is consistent with the power supply (see electrical schematic diagram), and whether the rotation direction of motor is correct (clockwise from the end of the shaft).
3. Regular
The power unit motor is gap type
4. The work week
The continuous working time of one start is 3 minutes and the rest is 7 minutes. It can not run continuously.
5. The working pressure of the hydraulic power unit has been adjusted when it leaves the factory. In order to maintain a good use state, please do not adjust it casually.
6. The hydraulic power unit should use anti-wear hydraulic oil with a kinematic viscosity of 27 43mm/s(50°C). Ya-n46 is recommended when the oil temperature is lower than 50°C, and YA-N68 is recommended when the oil temperature is higher than 50°C
10~ 25μm filter filter, conventional adding amount is 85~90% of the effective volume of the tank, conventional oil temperature should be within the range of -10~80°C, especially cold areas, low temperature hydraulic oil should be used.

AC-380V-1.5KW-Single-Acting-Hydraulic-Power-Packs07


Product detail pictures:

Massive Selection for Stanley Hydraulic Power Unit - AC 380V 1.5KW Single Acting Hydraulic Power Packs – Oumai detail pictures

Massive Selection for Stanley Hydraulic Power Unit - AC 380V 1.5KW Single Acting Hydraulic Power Packs – Oumai detail pictures

Massive Selection for Stanley Hydraulic Power Unit - AC 380V 1.5KW Single Acting Hydraulic Power Packs – Oumai detail pictures

Massive Selection for Stanley Hydraulic Power Unit - AC 380V 1.5KW Single Acting Hydraulic Power Packs – Oumai detail pictures

Massive Selection for Stanley Hydraulic Power Unit - AC 380V 1.5KW Single Acting Hydraulic Power Packs – Oumai detail pictures

Massive Selection for Stanley Hydraulic Power Unit - AC 380V 1.5KW Single Acting Hydraulic Power Packs – Oumai detail pictures


Related Product Guide:

Our solutions are broadly acknowledged and dependable by users and may meet consistently developing economic and social requires for Massive Selection for Stanley Hydraulic Power Unit - AC 380V 1.5KW Single Acting Hydraulic Power Packs – Oumai , The product will supply to all over the world, such as: Holland, venezuela, Muscat, we always keep our credit and mutual benefit to our client, insist our high quality service to moving our clients. always welcome the our friends and clients to come and visit our company and guid our business, if you are interested in our products, you can also submit your purchase information online, and we will contact you immediately, we keep our highly sincere cooperation and wish everything in your side are all well.
  • Factory equipment is advanced in the industry and the product is fine workmanship, moreover the price is very cheap, value for money!
    5 Stars By Doris from Houston - 2017.11.01 17:04
    The sales manager is very patient, we communicated about three days before we decided to cooperate, finally, we are very satisfied with this cooperation!
    5 Stars By Marian from Kenya - 2018.12.11 11:26
    Write your message here and send it to us