• inner-banner

High Quality for Hydraulic Pump Unit - AC 380V 1.5KW Single Acting Hydraulic Power Packs – Oumai

High Quality for Hydraulic Pump Unit - AC 380V 1.5KW Single Acting Hydraulic Power Packs – Oumai

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

We always think and practice corresponding to the change of circumstance, and grow up. We aim at the achievement of a richer mind and body and the living for Chief Hydraulic Cylinders, Hydraulic Power Unit 12v, Telescoping Hydraulic Cylinder, Trust us and you will gain more. Please feel free to contact us for more information, we assure you of our best attention at all times.
High Quality for Hydraulic Pump Unit - AC 380V 1.5KW Single Acting Hydraulic Power Packs – Oumai Detail:

Main Specifications

Motor: AC 380V 1.1KW
Solenoid valve: 2/2ways solenoid control valve
Pump displacement: 3.2CC/REV
System flow: 4.5lpm
Tank: 12L steel square tank
Mounting type: Vertical
Hydraulic power unit

Power Voltage AC110, AC220, AC380, DC12V, DC24V or customized
Moter Power 0.75kw, 1.1kw, 1.5kw, 2.2kw, 3.0kw or customized
Pump Displacement 0.45ml/r, 0.75ml/r, 1.0ml/r, 1.6ml/r, 2.0ml/r, 2.5ml/r, 3.3ml/r, 4.2ml/r,5.8 ml/r or customized
Solenoid Valve Voltage DC12V, DC24V, AC24V, AC110V, AC220V, manual valve
Mounting Way Horizontal, Vertical
Mounting position Valve block,  bracket, oil tank, electric motor
System Pressure 10mpa, 16mpa, 20mpa, 25mpa
Capacity of tank 1.7L, 2.8L, 3.6L, 5.0L, 6.0L, 8.0L, 10.0L, 12.0L or customized
Circuit 01-20
Port 3/8″ (BSPP/NPT) or customized
Working Continute working, short time working
Frequency 50HZ, 60HZ

Precautions for Use

1. Please read the operation manual carefully and check the product model and parameters for correctness.
2. The hydraulic power unit should be installed correctly and connected correctly. Pay attention to whether the voltage of motor and solenoid valve is consistent with the power supply (see electrical schematic diagram), and whether the rotation direction of motor is correct (clockwise from the end of the shaft).
3. Regular
The power unit motor is gap type
4. The work week
The continuous working time of one start is 3 minutes and the rest is 7 minutes. It can not run continuously.
5. The working pressure of the hydraulic power unit has been adjusted when it leaves the factory. In order to maintain a good use state, please do not adjust it casually.
6. The hydraulic power unit should use anti-wear hydraulic oil with a kinematic viscosity of 27 43mm/s(50°C). Ya-n46 is recommended when the oil temperature is lower than 50°C, and YA-N68 is recommended when the oil temperature is higher than 50°C
10~ 25μm filter filter, conventional adding amount is 85~90% of the effective volume of the tank, conventional oil temperature should be within the range of -10~80°C, especially cold areas, low temperature hydraulic oil should be used.

AC-380V-1.5KW-Single-Acting-Hydraulic-Power-Packs07


Product detail pictures:

High Quality for Hydraulic Pump Unit - AC 380V 1.5KW Single Acting Hydraulic Power Packs – Oumai detail pictures

High Quality for Hydraulic Pump Unit - AC 380V 1.5KW Single Acting Hydraulic Power Packs – Oumai detail pictures

High Quality for Hydraulic Pump Unit - AC 380V 1.5KW Single Acting Hydraulic Power Packs – Oumai detail pictures

High Quality for Hydraulic Pump Unit - AC 380V 1.5KW Single Acting Hydraulic Power Packs – Oumai detail pictures

High Quality for Hydraulic Pump Unit - AC 380V 1.5KW Single Acting Hydraulic Power Packs – Oumai detail pictures

High Quality for Hydraulic Pump Unit - AC 380V 1.5KW Single Acting Hydraulic Power Packs – Oumai detail pictures


Related Product Guide:

We believe that long time period partnership is a result of top of the range, value added services, rich expertise and personal contact for High Quality for Hydraulic Pump Unit - AC 380V 1.5KW Single Acting Hydraulic Power Packs – Oumai , The product will supply to all over the world, such as: Angola, belarus, Qatar, We have developed large markets in many countries, such as Europe and the United States, Eastern Europe and Eastern Asia. Meanwhile with the powerful predominance in persons with ability, strict production management and business concept.we constantly carry on self-innovation, technological innovation, managing innovation and business concept innovation. To follow the world markets fashion, new products are kept on researching and providing to guarantee our competitive advantage in styles, quality, price and service.
  • The company account manager has a wealth of industry knowledge and experience, he could provide appropriate program according our needs and speak English fluently.
    5 Stars By Joa from Leicester - 2017.08.18 11:04
    The company can think what our think, the urgency of urgency to act in the interests of our position, can be said this is a responsible company, we had a happy cooperation!
    5 Stars By Diego from Hungary - 2018.05.13 17:00
    Write your message here and send it to us