• inner-banner

2022 New Style 20 Gpm Hydraulic Power Unit - AC 380V 1.5KW Single Acting Hydraulic Power Packs – Oumai

2022 New Style 20 Gpm Hydraulic Power Unit - AC 380V 1.5KW Single Acting Hydraulic Power Packs – Oumai

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

Sticking for the basic principle of "Super Top quality, Satisfactory service" ,We've been striving to be an excellent business enterprise partner of you for Two Way Hydraulic Cylinder, Top Link Hydraulic Cylinder, Double Acting Hydraulic Cylinder Working, Teamwork is encouraged at all levels with regular campaigns. Our research team experiments on various developments in the industry for improvement in the products.
2022 New Style 20 Gpm Hydraulic Power Unit - AC 380V 1.5KW Single Acting Hydraulic Power Packs – Oumai Detail:

Main Specifications

Motor: AC 380V 1.1KW
Solenoid valve: 2/2ways solenoid control valve
Pump displacement: 3.2CC/REV
System flow: 4.5lpm
Tank: 12L steel square tank
Mounting type: Vertical
Hydraulic power unit

Power Voltage AC110, AC220, AC380, DC12V, DC24V or customized
Moter Power 0.75kw, 1.1kw, 1.5kw, 2.2kw, 3.0kw or customized
Pump Displacement 0.45ml/r, 0.75ml/r, 1.0ml/r, 1.6ml/r, 2.0ml/r, 2.5ml/r, 3.3ml/r, 4.2ml/r,5.8 ml/r or customized
Solenoid Valve Voltage DC12V, DC24V, AC24V, AC110V, AC220V, manual valve
Mounting Way Horizontal, Vertical
Mounting position Valve block,  bracket, oil tank, electric motor
System Pressure 10mpa, 16mpa, 20mpa, 25mpa
Capacity of tank 1.7L, 2.8L, 3.6L, 5.0L, 6.0L, 8.0L, 10.0L, 12.0L or customized
Circuit 01-20
Port 3/8″ (BSPP/NPT) or customized
Working Continute working, short time working
Frequency 50HZ, 60HZ

Precautions for Use

1. Please read the operation manual carefully and check the product model and parameters for correctness.
2. The hydraulic power unit should be installed correctly and connected correctly. Pay attention to whether the voltage of motor and solenoid valve is consistent with the power supply (see electrical schematic diagram), and whether the rotation direction of motor is correct (clockwise from the end of the shaft).
3. Regular
The power unit motor is gap type
4. The work week
The continuous working time of one start is 3 minutes and the rest is 7 minutes. It can not run continuously.
5. The working pressure of the hydraulic power unit has been adjusted when it leaves the factory. In order to maintain a good use state, please do not adjust it casually.
6. The hydraulic power unit should use anti-wear hydraulic oil with a kinematic viscosity of 27 43mm/s(50°C). Ya-n46 is recommended when the oil temperature is lower than 50°C, and YA-N68 is recommended when the oil temperature is higher than 50°C
10~ 25μm filter filter, conventional adding amount is 85~90% of the effective volume of the tank, conventional oil temperature should be within the range of -10~80°C, especially cold areas, low temperature hydraulic oil should be used.

AC-380V-1.5KW-Single-Acting-Hydraulic-Power-Packs07


Product detail pictures:

2022 New Style 20 Gpm Hydraulic Power Unit - AC 380V 1.5KW Single Acting Hydraulic Power Packs – Oumai detail pictures

2022 New Style 20 Gpm Hydraulic Power Unit - AC 380V 1.5KW Single Acting Hydraulic Power Packs – Oumai detail pictures

2022 New Style 20 Gpm Hydraulic Power Unit - AC 380V 1.5KW Single Acting Hydraulic Power Packs – Oumai detail pictures

2022 New Style 20 Gpm Hydraulic Power Unit - AC 380V 1.5KW Single Acting Hydraulic Power Packs – Oumai detail pictures

2022 New Style 20 Gpm Hydraulic Power Unit - AC 380V 1.5KW Single Acting Hydraulic Power Packs – Oumai detail pictures

2022 New Style 20 Gpm Hydraulic Power Unit - AC 380V 1.5KW Single Acting Hydraulic Power Packs – Oumai detail pictures


Related Product Guide:

We take "customer-friendly, quality-oriented, integrative, innovative" as objectives. "Truth and honesty" is our administration ideal for 2022 New Style 20 Gpm Hydraulic Power Unit - AC 380V 1.5KW Single Acting Hydraulic Power Packs – Oumai , The product will supply to all over the world, such as: Kuala Lumpur, Sweden, Mombasa, We adhere to client 1st, top quality 1st, continuous improvement, mutual advantage and win-win principles. When cooperation together with the customer, we provide shoppers with the highest high-quality of service. Established good business relations using the Zimbabwe buyer inside the business, we've got established own brand and reputation. At the identical time, wholeheartedly welcome new and old prospects to our company to go to and negotiate small business.
  • Good quality and fast delivery, it's very nice. Some products have a little bit problem, but the supplier replaced timely, overall, we are satisfied.
    5 Stars By Polly from Puerto Rico - 2017.04.08 14:55
    The sales manager is very patient, we communicated about three days before we decided to cooperate, finally, we are very satisfied with this cooperation!
    5 Stars By Ella from Mongolia - 2018.09.23 18:44
    Write your message here and send it to us