• inner-banner

100% Original Factory Chief Hydraulic Cylinders - AC 380V 1.5KW Single Acting Hydraulic Power Packs – Oumai

100% Original Factory Chief Hydraulic Cylinders - AC 380V 1.5KW Single Acting Hydraulic Power Packs – Oumai

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

We now have a highly efficient crew to deal with inquiries from clients. Our intention is "100% shopper pleasure by our merchandise quality, price tag & our staff service" and take pleasure in a very good standing amongst purchasers. With quite a few factories, we can easily provide a wide vary of Small Hydraulic Piston, Hydraulic Power Pack, Hydraulic Cylinder Components, Now we have experienced manufacturing facilities with extra than 100 employees. So we could guarantee short lead time and high quality assurance.
100% Original Factory Chief Hydraulic Cylinders - AC 380V 1.5KW Single Acting Hydraulic Power Packs – Oumai Detail:

Main Specifications

Motor: AC 380V 1.1KW
Solenoid valve: 2/2ways solenoid control valve
Pump displacement: 3.2CC/REV
System flow: 4.5lpm
Tank: 12L steel square tank
Mounting type: Vertical
Hydraulic power unit

Power Voltage AC110, AC220, AC380, DC12V, DC24V or customized
Moter Power 0.75kw, 1.1kw, 1.5kw, 2.2kw, 3.0kw or customized
Pump Displacement 0.45ml/r, 0.75ml/r, 1.0ml/r, 1.6ml/r, 2.0ml/r, 2.5ml/r, 3.3ml/r, 4.2ml/r,5.8 ml/r or customized
Solenoid Valve Voltage DC12V, DC24V, AC24V, AC110V, AC220V, manual valve
Mounting Way Horizontal, Vertical
Mounting position Valve block,  bracket, oil tank, electric motor
System Pressure 10mpa, 16mpa, 20mpa, 25mpa
Capacity of tank 1.7L, 2.8L, 3.6L, 5.0L, 6.0L, 8.0L, 10.0L, 12.0L or customized
Circuit 01-20
Port 3/8″ (BSPP/NPT) or customized
Working Continute working, short time working
Frequency 50HZ, 60HZ

Precautions for Use

1. Please read the operation manual carefully and check the product model and parameters for correctness.
2. The hydraulic power unit should be installed correctly and connected correctly. Pay attention to whether the voltage of motor and solenoid valve is consistent with the power supply (see electrical schematic diagram), and whether the rotation direction of motor is correct (clockwise from the end of the shaft).
3. Regular
The power unit motor is gap type
4. The work week
The continuous working time of one start is 3 minutes and the rest is 7 minutes. It can not run continuously.
5. The working pressure of the hydraulic power unit has been adjusted when it leaves the factory. In order to maintain a good use state, please do not adjust it casually.
6. The hydraulic power unit should use anti-wear hydraulic oil with a kinematic viscosity of 27 43mm/s(50°C). Ya-n46 is recommended when the oil temperature is lower than 50°C, and YA-N68 is recommended when the oil temperature is higher than 50°C
10~ 25μm filter filter, conventional adding amount is 85~90% of the effective volume of the tank, conventional oil temperature should be within the range of -10~80°C, especially cold areas, low temperature hydraulic oil should be used.

AC-380V-1.5KW-Single-Acting-Hydraulic-Power-Packs07


Product detail pictures:

100% Original Factory Chief Hydraulic Cylinders - AC 380V 1.5KW Single Acting Hydraulic Power Packs – Oumai detail pictures

100% Original Factory Chief Hydraulic Cylinders - AC 380V 1.5KW Single Acting Hydraulic Power Packs – Oumai detail pictures

100% Original Factory Chief Hydraulic Cylinders - AC 380V 1.5KW Single Acting Hydraulic Power Packs – Oumai detail pictures

100% Original Factory Chief Hydraulic Cylinders - AC 380V 1.5KW Single Acting Hydraulic Power Packs – Oumai detail pictures

100% Original Factory Chief Hydraulic Cylinders - AC 380V 1.5KW Single Acting Hydraulic Power Packs – Oumai detail pictures

100% Original Factory Chief Hydraulic Cylinders - AC 380V 1.5KW Single Acting Hydraulic Power Packs – Oumai detail pictures


Related Product Guide:

Our concentrate on is always to consolidate and enhance the excellent and service of present solutions, in the meantime regularly develop new products to meet distinctive customers' demands for 100% Original Factory Chief Hydraulic Cylinders - AC 380V 1.5KW Single Acting Hydraulic Power Packs – Oumai , The product will supply to all over the world, such as: Latvia, Bogota, Sao Paulo, Our staffs are adhering to the "Integrity-based and Interactive Development" spirit, and the tenet of "First-class Quality with Excellent Service". According to the needs of every customer, we give customized & personalised services to help customers achieve their goals successfully. Welcome clients from home and abroad to call and inquire!
  • High production efficiency and good product quality, fast delivery and completed after-sale protection, a right choice, a best choice.
    5 Stars By Dana from Auckland - 2018.11.22 12:28
    The goods are very perfect and the company sales manager is warmful, we will come to this company to purchase next time.
    5 Stars By Frank from Grenada - 2018.06.05 13:10
    Write your message here and send it to us